WyreStorm Essentials 8K60 1:2 HDMI Splitter

SKU:

£101.24

  • Availability: In Stock
  • Category: Splitters

Our EXP-SP-0102-8K packs a punch as it is a powerful plug-and-play 8K HDMI splitter that has the ability to send uncompressed up to 8K@60Hz or 4K@120Hz up to two displays, but the most useful feature of this splitter is that the second output can scale content down from either 8K>4K or 4K>1080p! Furthermore, its compatible with DSC (Display Stream Compression) version 1.2a pass-through, an approved method of compression in accordance to the HDMI 2.1 specification, allowing up to a lossless 10K@120Hz signal to be transmitted.

Don’t forget to pair this splitter with our passive or active HDMI 2.1 cables!

SCALING SOLUTIONS

As early adopters of 4K and 8K signal distribution, we know that retrofitting is important in the dawn of new resolution standards. With our splitter, you can rest assured that you won’t be forced to upgrade all displays or AVRs to 8K to reap its benefits. Just set the splitter to downscale to 4K and enjoy 8K content while supporting 4K at the same time!

EDID MANAGEMENT

Display compatibility is the last thing you need to worry about. Our splitter gives you 5 EDIDs that can be adjusted via dipswitches. The splitter also supports Smart EDID, which will auto-negotiate EDIDs based on the detected displays and adjust accordingly.

8K AND BEYOND

Our Essentials 8K splitter not only meets 8K demands but they’re empowered with DSC passthrough, an approved method found in the HDMI 2.1 specification to transmit super-high bandwidth content (up to 10K@120Hz!) producing mathematically lossless content.

COMPLETE YOUR SETUP

WyreStorm offers HDMI 2.1 cables in a number of different lengths and flavors. Use our passive 2.1 cables for short distances up to 3m (9ft). If you need to go a long distance take advantage of our Active Optical 2.1 cables that can reach 15m (50ft).

Technical Specifications

Additional Features

TRANSMISSION

Transmission Encoding

Uncompressed (with DSC 1.2a Pass-through between Source-Display when required)

End to End Latency

Zero

Maximum Transmission Bit Rate

40Gbps (4-core, 10Gbps per lane)

VIDEO

HDMI

TMDS (600MHz Maximum) | FRL (16b/18b encoding) | DSC 1.2a Supported 

Input

1x HDMI: 19-pin type A Male

Output

2x HDMI: 19-pin type A Male

Maximum Data Rate

40 Gbps (FRL) | 18 Gbps (TMDS)

Video Resolution (Max)

1920 x 1080p @240Hz   
4096 x 2160p @120Hz 4:4:4 10bit   
5120 x 2880p @60Hz 4:4:4 10bit 
7680 x 4320p @60Hz 4:2:0 10bit
10240x4320p @120Hz w/DSC

Supported Standards

DCI | HDR10+ | Dolby Vision | HLG | SL-HDR1 | PQ | BT.2020 | BT.2100 

AUDIO

Audio Return Channel (ARC)

Supported

Audio Formats

2ch PCM | Multichannel LPCM | DTS-X | Dolby Atmos

Maximum Sampling Rate

192KHz

Maximum Audio Channels

32

COMMUNICATION & CONTROL

HDMI

HDMI 2.1 | HDCP 2.3 | EDID | CEC (Pass-through) | VRR (Variable Refresh Rate) | ALLM (Auto Low Latency Mode) | FVA (Fast Vactive)

POWER

Power Consumption

12V DC 1A

Max Power Consumption

3.5W

ENVIRONMENTAL

Maximum BTU

12BTU/hr

ESD Protection

Human-body Model:  

±8kV (Air-gap discharge) / ±4kV (Contact discharge)  

  • HDCP 2.3 compliant
  • S/PDIF audio output from HDMI de-embed
  • Supports up to 40Gbps FRL and 18Gbps TMDS
  • FRL to TMDS and TMDS to FRL mode conversion
  • Supports HDMI2.1 features such as QFT (Quick Frame Transport), QMS (Quick Media Switching), ALLM (Auto Low Latency Mode) and VRR (Variable Refresh Rate)
  • Small compact size for discrete installations
  • No single use plastic included* #SUPFree

In the Box

  • 1x EXP-SP-0102-8K
  • 1x DC 12V PSU (UK/US/EU/AU)
  • 2x Mounting Brackets (with screws)

 

Related products